what to set this on

ok i was looking in my bios and i dont know much about overclocking or what not but i have a giga-byte GA-KANS-939 with amd 64 3000, 9800 128mb pro 1024mb 3200

now in bios ir has my cpu overclock in mhz on 200/455

agp overclock in mhz 66/100
cpu clock ratio : auto


i was just wandering if those are in the right spots and should they be on the lowest numbers?

 

Just thought I would throw this your way overclocking no matter how good people make it sound is very bad leaving those settings at the default is the recommended method but the processor manufacturer or motherboard manufacturer has specs for clocking. But be warned ahead by overclocking you gain little increase in speed but half the life of your components one resistor under rated or capacitor meltdown will scrap the board I know been there already just "BE CAREFULl". Those settings are set for maximum component profeciency and by changing it you also cause an great increase in heat which slows down everything else in my opinion not worth it but check manufacters site for details on OC.