Wiring for new computer

I am building a new computer. I have a Demon II case and a Gigabyte P4 Titan Motherboard (Model GA-8SIMLH). Does anyone know how to wire the case to the motherboard? I was able to find the connector on the MB for the Power Switch and Reset Switch but I have several other connectors for the front Audio that I'm not sure where they plug into.

Thanks for any help you can give.

John

 

Check your manuals from your component manufacturers. Don't wish to sound like an a**, but they should provide pictures/drawings in the manuals referring to what you are asking. Have a Happy New Year!

 

Forgot, welcome to MajorGeeks!

 

i'm not sure how your case works but mine has some audio cables(a mic and headphone cable) ... my case came with a PCI slot cover w/ a hole in it and the cable itself has this rubber fitter on it which fits into the PCI slot cover hole .. you stick the audio cables out the back and connect them to your sound cards mic and headphone port or your integrated audio port on your motherboard(on the outside) ... might be different in your case but I'm assuming it's the same with yours

 

That's the problem in that the manual for the motherboard doesn't exactly match the cables that are attached to the case. The wires I am referring to are for the front Audio connectors on the case.

 

Sometimes there will be wires left over from case to any particular motherboard and also sometimes if you have a 4 pin wire 1.2.3. blank. and connector on mB is 1.2.blank.3.4. or similar you must take out the connector with the wire and place into the appropriate connector to match MB connection, On the Case wire connector there is a very small tag that you lift and the wire should then pull out with ease.. and then place as wanted..