Virtual Memory Warnings, Computer Runs Extremely Slow

Operating System: Windows XP Home Edition Service Pack 3 (build 2600)
Processor: 1.70 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache
Main Circuit Board: Board: P4M266A-8237
Bus Clock: 100 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG
Memory Modules: 352 Megabytes Installed Memory
Slot 'A0' has 128 MB
Slot 'A1' has 256 MB

Hijack This Log is attached.

Please help me solve this problem.

 

http://www.majorgeeks.com/images/grenade.gifWelcome! to MajorGeeks.com!http://www.majorgeeks.com/images/grenade.gif

Please follow the instructions in the READ & RUN ME FIRST link given further down and attach the requested logs when you finish these instructions.

• If you have problems where no tools seem to run, please try following the steps given in the below and then continue on no matter what you find. You only need to try the TDSSserv steps if having problems getting scans in the Read & Run Me First.
  • TDSSserv Non-Plug & Play Driver Disable
• If something does not run, write down the info to explain to us later but keep on going.
• Do not assume that because one step does not work that they all will not.

READ & RUN ME FIRST. Malware Removal Guide


Helpful Notes:

1. If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in Safe Mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:
   
   • Starting your computer in Safe mode
2. If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware, Malwarebytes and Spybot ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
3. To avoid additional delay in getting a response, it is advised that after completing the READ & RUN ME you also read this sticky:
   • Don't Bump! It Only Hurts You!
4. Any additional post is a bump which will add more delay. Once you attach the logs, your thread will be in the work queue and as stated our system works the oldest threads FIRST.

 

Thank you for the quick response. I completed all of the procedures in Read and Run Me first. Attached are the logs for Malware and Combofix.

 

I need the rest of the logs. You are missing the SAS log, ComboFix Log and the MGTools log.

 

Thank you for responding again....

I have attached the MGTools log and the SAS log. In my previous post I had attached the ComboFix log.

 

I don't know if the combo.txt is the file you wanted so I uploaded the catchme.log as well....