Over 500 infected files

Ramnit infections have really become quit nasty and dangerous. We could attempt to remove it, and we have had some success in the past, but recently it has become even more trouble to remove. It is really safer to just bite the bullet and do a clean reinstall.

The problem is that the damage caused by this infection really makes a PC unreliable/untrustworthy. PE file infectors like Ramnit, Virut,.... etc can infect all executable files (DLL, EXE, SCR....and many more and also HTML). These infections can open back doors that truly may compromise your computer and your security. These backdoors could allow a remote attacker to access and instruct the infected computer to download and execute more malicious files.

In many cases the infected files (which could number in the thousands) cannot be disinfected properly by your anti-virus or by other scanning tools. Also when disinfection is attempted, the files often become corrupted and the system may become unstable or irrepairable. The longer Ramnit remains on a computer, the more files it may infect and/or corrupt so the degree of infection can vary.

Ramnit is commonly spread via a flash drive (usb, pen, thumb, jump) infection where it copies the Ramnit worm using a random file name. The infection is often contracted by visiting remote, crack and keygen sites. These type of sites are a major source of system infection.

So all the above being said, and please do take serious note of the warnings, do you really wish to attempt cleaning even though the stability and security of your be cannot be guaranteed? And also note that we could spend a lot of time trying to fix it and still fail due to the number of files that have been infected. What would you like to do?

 

Alrighty then. Three back to back ESET scans, attach a zipped log of all three when complete. YES, these scans take time...

 

Okay then, now follow through with the below, please:



Please read ALL of this message including the notes before doing anything.

Pleases follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide


and attach the requested logs when you finish these instructions.

• **** If something does not run, write down the info to explain to us later but keep on going. ****
• Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.

• After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!

Helpful Notes:

1. If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:
   
   • Starting your computer in Safe mode
2. If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
3. If you cannot seem to login to an infected user account, try using a different user account (if you have one) in either normal or safe boot mode and running only SUPERAntiSpyware and Malwarebytes while logged into this other user account. Then reboot and see if you can log into the problem user account. If you can then run SUPERAntiSpyware, Malwarebytes, ComboFix and MGtools on the infected account as requested in the instructions.
4. To avoid additional delay in getting a response, it is strongly advised that after completing the READ & RUN ME you also read this sticky:
   • Don't Bump! It Only Hurts You!!!

Any additional post is a bump which will add more delay. Once you attach the logs, your thread will be in the work queue and as stated our system works the oldest threads FIRST.
​

 

Well if you are sure all is okay then that's fine. If not, and you wish to check for any remaining malware (as some can linger) then feel free to attach logs.

 

You followed the guide fully. So please attach all of the requested logs! Forget having to take it to PC repair shop, let me take a look.

 

Not seeing much in the way of malware in your logs. Let's do this however:

First, please put ComboFix directly on your desktop, not where you have it:
Running from: c:\documents and settings\Owner\My Documents\Downloads\ComboFix.exe

* Make sure that combofix.exe that you downloaded while doing the READ & RUN ME is on your Desktop but Do not run it!
If it is not on your Desktop, the below will not work.
* Also make sure you have shut down all protection software (antivirus, antispyware...etc) or they may get in the way of allowing ComboFix to run properly.
* If ComboFix tells you it needs to update to a new version, make sure you allow it to update.
* Open Notepad and copy/paste the text in the below code box into it (make sure you scroll all the way down in the code box to get all lines selected ):

Code:

KILLALL::

Driver::
antc4a1
bjq3afa
bna11be
bob9988
cpic3a5
erd376a
erec4a5
erj1c54
fsecc26
kce755f
nfh8872
tlsc66c

File::
c:\windows\system32\drivers\antc4a1.sys
c:\windows\system32\drivers\bjq3afa.sys 
c:\windows\system32\drivers\bna11be.sys
c:\windows\system32\drivers\bob9988.sys
c:\windows\system32\drivers\cpic3a5.sys
c:\windows\system32\drivers\erd376a.sys
c:\windows\system32\drivers\erec4a5.sys
c:\windows\system32\drivers\erj1c54.sys 
c:\windows\system32\drivers\fsecc26.sys
c:\windows\system32\drivers\kce755f.sys 
c:\windows\system32\drivers\nfh8872.sys 
c:\windows\system32\drivers\tlsc66c.sys

* Save the above as CFscript.txt and make sure you save it to the same location (should be on your Desktop) as ComboFix.exe
* At this point, you MUST EXIT ALL BROWSERS NOW before continuing!
* You should have both the ComboFix.exe and CFScript.txt icons on your Desktop.
If it asks you to overide the previous file with the same name, click YES.
* Now use your mouse to drag CFscript.txt on top of ComboFix.exe
http://img.photobucket.com/albums/v666/sUBs/CFScriptB-4.gif
* Follow the prompts.
* When it finishes, a log will be produced named c:\combofix.txt
* I will ask for this log below

Note:

Do not mouseclick combofix's window while it is running. That may cause it to stall.

Now run the C:\MGtools\GetLogs.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).

Then attach the below logs:

* C:\ComboFix.txt
* C:\MGlogs.zip

Make sure you tell me how things are working now!

 

Do you use this:
cacaoweb

 

Combo didn't like it. You may need to reinstall it if it was broken by Combo. What issues are you still having, if any.

 

If your eSet scans were coming up clean, and your other logs look good, then:

If you are not having any other malware problems, it is time to do our final steps:

1. We recommend you keep SUPERAntiSpyware and Malwarebytes Anti-Malware for scanning/removal of malware. Unless you purchase them, they provide no real time protection. They do not use any significant amount of resources ( except a little disk space ) until you run a scan.We recommend them for doing backup scans when you suspect a malware infection.
2. If we had you use ComboFix, uninstall ComboFix (This uninstall will only work as written if you installed ComboFix on your Desktop like we requested.)
   
   • Click START then RUN and enter the below into the run box and then click OK. Note the quotes are required
   • "%userprofile%\Desktop\combofix" /uninstall
     
     • Notes: The space between the combofix" and the /uninstall, it must be there.
     • This will uninstall ComboFix and also reset hidden files and folders settings back to Windows defaults.
     
     
   
   
3. Go back to step 6 of the READ ME and renable your Disk Emulation software with Defogger if you had disabled it.
4. Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
5. If we had you download any registry patches like fixme.reg or fixWLK.reg (or any others), you can delete these files now.
6. If running Vista, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
7. Go to add/remove programs and uninstall HijackThis.
8. Goto the C:\MGtools folder and find the MGclean.bat file. Double click on this file to run this cleanup program that will remove files and folders related to MGtools and some other items from our cleaning procedures.
9. If you are running Win 7, Vista, Windows XP or Windows ME, do the below:
   
   • Refer to the cleaning procedures pointed to by step 7 of the READ ME
     for your Window version and see the instructions to Disable System Restore which will flush your Restore Points.
   • Then reboot and Enable System Restore to create a new clean Restore Point.
   
   
10. After doing the above, you should work thru the below link:
    
    • How to Protect yourself from malware!
    
    

Support MajorGeeks with Geek Wear!