pop ups maleware turned off

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Pleases follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide


and attach the requested logs when you finish these instructions.

• **** If something does not run, write down the info to explain to us later but keep on going. ****
• Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.

• After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!

Helpful Notes:

1. If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:
   
   • Starting your computer in Safe mode
2. If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
3. If you cannot seem to login to an infected user account, try using a different user account (if you have one) in either normal or safe boot mode and running only SUPERAntiSpyware and Malwarebytes while logged into this other user account. Then reboot and see if you can log into the problem user account. If you can then run SUPERAntiSpyware, Malwarebytes, ComboFix and MGtools on the infected account as requested in the instructions.
4. To avoid additional delay in getting a response, it is strongly advised that after completing the READ & RUN ME you also read this sticky:
   • Don't Bump! It Only Hurts You!!!

Any additional post is a bump which will add more delay. Once you attach the logs, your thread will be in the work queue and as stated our system works the oldest threads FIRST.​

 

You need to attach logs as requested.

Did you try runing RootRepeal?
Did you try running MGtools?

 

Not likely. If you could download and run RootRepeal, you should be able to run other things including MGtools. There is nothing in your RootRepeal log to indicate problems. We need more info which is why we need the READ & RUN ME to be followed from beginning to end.

If you still are sure you cannot run MGtools, try the below.

Please try running the below online scan:

http://www.superantispyware.com/onlinescan.html

Reboot immediately after scanning if it finds and removes anything. Let me know if anything was found. It does not save a log.

Now try the below:

• Download this Win32kDiag and save to C:\Win32kDiag.exe. You must save it here!!!!
• Click on Start->Run, and copy-paste the following command (the bolded text) into the "Open" box, and click OK. When it's finished, there will be a log called Win32kDiag.txt on your desktop. Please attach this log

C:\win32kdiag.exe -f -r

Now we need to scan the system with this special tool.

• Please download Junction.zip and save it to your root folder (C:\Junction.zip)
• Unzip it and put junction.exe in the root folder (C:\junction.exe)
• Now click Start => Run... => Copy and paste the following command in the run box and click OK:
  cmd /c junction -s c:\ >C:\log.txt​
• A command prompt window opens and also a license agreement from SysInternals will appear.
• Accept the license agreement and the scan will begin.
• Wait until a log file opens. Attach this C:\log.txt when it finishes (the command prompt window will close when it finishes).
• NOTE: It scans your whole hard disk so if can take a long time. Be patient and don't do anything else while it is scanning.